The neck is straight. The frets are set properly. What now? Level them! Continue reading »
Oct 142018
seib
Oct 142018
The guitar kit came with a fretted neck – but a completely unleveled one. A fret job needs to be done! Continue reading »
Sep 212018
I’ve already had the plan for the 12-string guitar’s headstock for some time:
… now I’m finally doing it! Continue reading »
Sep 192018
As already written, I have to modify the pickguard a bit. OK, so how do the holes in an original Fender pickguard look? … ah. The potentiometer holes would, in theory, have to be widened to 9.525 mm, as Fender thinks imperialistic and uses inch units. 3/8 ” naturally sounds more natural than 9.525 mm, but drills in inch formats are hard to get in Austria; in most areas of normal life, the metric system is the norm here. Continue reading »
Sep 132018
I had planned to replace the electronics in my guitar kit with those from a Stratocaster. It looks like this is not going to be as easy as planned… Continue reading »
Sep 122018
Looking at the tuners contained in my guitar kit, it’s easy to see how it could be so cheap. They are totally wobbly and, with a (hand-determined) 14:1 ratio rather crude. Tuning is presumably not very easy with these … a replacement is needed. But what should I use? Continue reading »
Sep 122018
One design point still needs to be adressed before I finally start working on my guitar kit: in which color should it shine?
Based on the images on the web site, I thought that the only way would be to simply paint it. But since the wood looks far nicer than expected, I think that it should look quite good if I stained it in blue with a black border – “an hour before Sunburst”, so to say. That should be within my means. Here’s a quickly created image, showing how I’d imagine the result to look like:
If I can transport this into reality, the guitar should become quite beautiful. The scratchplate might have to be replaced, however. We’ll see…
| Back: Head Scratching | Next: Tuners! |
Sep 122018
The headstock on my 12 string E-guitar kit really doesn’t look great:
That needs to be changed. But how? Continue reading »
Sep 122018
I love tools. You can never have enough 😎 … and, although a soldering iron, two screw drivers and a spanner would be sufficient to finish this guitar kit in a minimal way, it offers a lot of possibilities to indulge in this passion. After all, the result should be good, right? Continue reading »
Sep 122018
So the guitar kit arrived:
… now what?
My daytime job’s description is “Analyst”. Well, so go to work, Mr. Analyst 🙂 Continue reading »